If you're planning on screwing your storeWALL panels direct to the wall (i.e.
you are not using HangUps), then we recommend you use these screws. Here's
why:
- Painted heads. Custom colored
to match the storeWALL panel colors.
- Universal Application. Designed to work with wood studs,
metal studs (up to 20ga) , poured concrete and concrete block (use 1/8” carbide
bit to provide a pilot hole in concrete and block applications).
- MULTIhead technology. Use a Posi-Drive, Phillips or #2
square-drive bit. Drive and countersink the screw without pre-drilling.
- Heavy Duty. Case hardened with zinc and PTFE coatings
to make driving screws easy.
You'll typically use about 60 screws per box of 4ft. storeWALL, and 80 per
box of 8ft. storeWALL. The screws are available in 3 lengths to be used as
shown in the table below:
| Surface To Be Fastened To |
Recommended Screw Length |
| Direct to wood or steel studs |
1" |
| Masonry / Block walls |
1" (drill 1/8" pilot holes through panel into wall) |
| Drywall (up to 3/4") over wood or steel studs |
1 3/4" |
| Drywall (over 3/4") over wood or steel studs |
2 1/2" |
| Furring Strips (typically 1" x 3") |
1" |
|
